Monolayer Membrane
Polyethylene Membrane Pore size ≦200nm
SEM IMAGE / Basic Properties
Single-layer Membrane
Middle Pore(100nm)
A polyethylene membrane featuring a uniform pore structure, identical on both sides.
Pore diameter can be controlled freely between 18nm and 2μm at the design stage.
Typical Properties
- * below not guranteed value.
| Item | Specific Range | Contents in detail page |
|---|---|---|
| Pore size (Ave.) | 50nm~200nm | Variation chart |
| Thickness | 10～50um | Actual value |
| Basis Weight | See in details page | Actual value |
| Porosity | 50~90% | Actual value |
| Air permeability | 10~100sec / 100cc | Actual value |
| Water flow | See in details page | Actual value |
| Ethanol flow | See in details page | Actual value |
| Tensile strength | See in details page | Actual value |
| Tensile elongation | See in details page | Actual value |
| Bubble points (Initial) | See in details page | Actual value |
| SEM Image | See in details page | Surface / Cross Section |
Contact Us
More Details Here.
For more detail information, please fill in registration form (click here)
Thank you for your cooperation!